Table of Contents
Advertisement
5.4 AC PARALLEL OPERATION
WARNING!
Do not start the generators before connecting the parallel cable.
If the cable is connected while one generator is running it will be
overloaded and the 'RESET' button will need to be pressed.
If the overload indicator light stays on after resetting the
generator stop the engine, wait for 5 minutes then restart it.
WARNING!
You can only connect an approved Hyundai inverter in parallel
with the approved parallel kit. Attempting to connect a different
brand or model in parallel with your generator will void your
warranty and could cause bodily harm.
NOTE
For continuous operation do not exceed the combined rated power.
At max output the generators must not run longer than 30 min.
Stop the engine before connecting or removing the parallel cable.
For single unit operation the parallel kit must be removed.
1.
Make sure both generators are OFF.
2.
Connect the parallel kit to the parallel socket of each generator.
3.
Start each engine according to 'Starting the Engine'.
4.
Confirm appliances are turned off, then connect the appliance to the
parallel kit.
5.
Turn on the appliance.
19
Advertisement
Table of Contents
