Table of Contents
Advertisement
NOTE: By selecting
recording when the final video is 10 seconds long. The actual length of
time that it will take to record the 10 second video will depend on the
interval duration, see section 2.8.2.
2.8.7 Metering
Metering mode refers to the way in which a camera determines the appropriate
exposure (quantity of light reaching the camera lens). Spot metering will only
base the exposure setting on a very small area of the scene. Center metering
will use the light from the center of the LCD and the Multi setting measures the
light at several points on the screen.
1. In Time Lapse Mode press the MENU button.
2. Press the OK button to enter the Photo mode settings.
3. Select Metering using the UP or DOWN buttons.
4. Press the OK button to enter the Metering submenu.
5. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option
6. Press the MENU button twice to exit the settings
2.8.8 Sharpness
This function adjusts the visible detail of a photograph.
1. In Time Lapse Mode press the MENU button.
2. Press the OK button to enter the Photo mode settings.
3. Select Sharpness using the UP or DOWN buttons.
4. Press the OK button to enter the Sharpness submenu.
5. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Sharp, Normal, Soft).
6. Press the MENU button twice to exit the settings menu.
2.8.9 Video Quality
The Video Quality function determines the level of compression the camera
uses when saving videos to a memory card.
1. In Time Lapse Mode press the MENU button.
2. Press the OK button to enter the Photo mode settings.
3. Select
time lapse will automatically stop
(Multi, Center, Spot,
using the UP or DOWN buttons.
Matrix).
menu.
50
Advertisement
Table of Contents
