Minolta MN60WP User Manual page 49

2.8.2 Interval Duration
This function allows you to set the amount of time in between images.
1. In Time Lapse Mode press the MENU button.
2. Press the OK button to enter the Photo mode settings.
3. Select Interval Duration using the UP or DOWN buttons.
4. Press the OK button to enter the Interval Duration submenu.
5. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected resolution (0.5 Seconds, 1 Second, 2
Seconds, 5 Seconds, 10 Seconds, 30 Seconds, 60 Seconds).
6. Press the MENU button twice to exit the settings menu.
frame every 10 seconds and create a video combining all of the
captured images. See the table below for how long it will take to record
1 second of video for each option;
Interval Duration Option
2.8.3 Distortion Correction
This function enables the camera to correct slight image distortions by
straightening the image and enhances it to appear more natural.
1. In Time Lapse Mode press the MENU button.
2. Press the OK button to enter the Photo mode settings.
3. Select
4. Press the OK button to turn Distortion Correction on and off, a check mark
indicates that the feature is active.
5. Press the MENU button twice to exit the settings menu.
Note: Distortion Correction is only available when the Movie Size setting
is 1080P or 720P.
0.5 Seconds
1 Second
2 Seconds
5 Seconds
10 Seconds
30 Seconds
60 Seconds
using the UP or DOWN buttons.
Length of time to record 1
second of video
15 Seconds
30 Seconds
60 Seconds
150 Seconds
300 Seconds
900 Seconds
1,800 Seconds
48
single