Table of Contents
Advertisement
2.4 Self-Timer
In Self Timer mode, the camera will take a single picture after a set amount
of time has elapsed with each press of the SHUTTER button.
To enter Self Timer mode, power the camera on and press the MODE button
to access the mode selection screen and use the UP or DOWN buttons to
select Timer and press the OK button to enter that mode.
1. Line up your shot by looking at the LCD screen to see what is in the shot.
2. Hold the camera steady and press the SHUTTER button to start a
countdown, when the countdown ends, a picture is captured.
3. The number of photos that can be captured at a particular resolution will
be displayed at the top of the screen.
4. The number of pictures remaining will be 0 if there is no memory card
be shown on the screen when the memory card is full.
5. The number of remaining photos is determined by the selected photo
resolution. The higher the photo resolution, the lower the number of
photos you are able to be save to the memory card. Before capturing any
photos, you can select a preferred photo resolution.
2.4.1 Photo Size
This function sets the photo resolution. The higher the resolution, the greater
the photo quality and the larger the file size of the photo.
1. In Self-Timer Mode press the MENU button.
2. Press the OK button to enter the Photo mode settings.
3. Select Photo Size using the UP or DOWN buttons.
4. Press the OK button to enter the Photo Size submenu.
5. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected resolution (48MP, 30MP, 24MP, 20MP,
16MP, 13MP, 12MP, 8MP).
6. Press the MENU button twice to exit the settings menu.
2.4.2 Self-Timer
This function determines the time delay before a photograph is captured. This
setting can be used by photographers to take photographs of themselves.
29
Advertisement
Table of Contents
