Table of Contents
Advertisement
(120fps), 1080P (60fps), 1080P (30fps), 720P (240fps), 720P (120fps),
720P (60fps), 720P (30fps)).
6. Press the MENU button twice to exit the settings menu.
2.7.2 Loop Duration
This function allows you to set a maximum duration for each video clip
recorded.
1. In Video Mode press the MENU button.
2. Press the OK button to enter the Photo mode settings.
3. Select Loop Duration using the UP or DOWN buttons.
4. Press the OK button to enter the Loop Duration submenu.
5. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected resolution (2 Minutes, 3 Minutes, 5
Minutes).
6. Press the MENU button twice to exit the settings menu.
2.7.3 Image Stabilization
This function enables photo capture in high speed and low-light by
electronically minimizing motion blur and reducing camera shake.
1. In Video Mode press the MENU button.
2. Press the OK button to enter the Photo mode settings.
3. Select
4. Press the OK button to turn Image Stabilization on and off, a check mark
indicates that the feature is active.
5. Press the MENU button twice to exit the settings menu.
Note: Image Stabilization and Distortion correction cannot be active at
the same time.
2.7.4 Distortion Correction
This function enables the camera to correct slight image distortion by
straightening the image and enhances it to appear more natural.
1. In Video Mode press the MENU button.
2. Press the OK button to enter the Photo mode settings.
3. Select
4. Press the OK button to turn Distortion Correction on and off, a check mark
using the UP or DOWN buttons.
using the UP or DOWN buttons.
43
Advertisement
Table of Contents
