Operation Of Gas Lift Stool - Champion 505 Owner's Operating And Maintenance Manual

OPERATION OF GAS LIFT STOOL

1. The stool is now ready for use. To raise the stool seating height, lift Release Handle without weight on seat.
2. To lower stool seating height, Lift the Release Handle while sitting on the seat; Release the handle when
desired height is reached. Approximate Range = 17 to 23 inches.
3. Position the optional Upholstered Back and Foot Ring into the desired positions using the Adjusting
Knobs.
WARNING
IMPORTANT:
• HIGH RESISTANCE (HR) CASTERS – Your Champion task chair may be equipped with High
Resistance (HR) casters. HR casters allow casters to roll freely when weighted or occupied but
resist rolling when unweighted or when exiting the task chair. Standard casters always roll freely
and may allow the task chair to move away from the occupant when leaving or entering the task
chair. The potential for this unintended/unweighted movement may be reduced with the use of
HR casters. Task chair users should be always attentive to their chair position when entering or
exiting the chair.
NOTE: HIGH RESISTANCE (HR) CASTERS MAY NOT RELEASE AND ROLL FREELY IF YOU WEIGH LESS
•
THAN 80 POUNDS. High Resistance Casters look the same as standard casters and may not be
easily distinguished from standard casters other than by loading and unloading them in a test.
If your Champion task chair did not come with the HR Caster option, and you would like to add
them, please contact Champion Mfg. for pricing and assembly instructions. Championchair.com
(352) 854-2929.
WRINKLES IN VINYL – Storage and shipping can cause wrinkles of the vinyl on your Champion task
•
chair. This is normal. Please allow 1 – 2 weeks at room temperature (approx. 70 degrees) to allow
for vinyl to expand back to original appearance.
Page 9 of 13
manual
Document No.: 006350 - Revision: A
Periodically recheck tightness of all fasteners, and never stand on the Upholstered
Seat.