Table of Contents
Advertisement
507 GAS-LIFT TASK SEATING
4300 4308 4350 4358 4400 4408 4450 4458
GAS-LIFT TASK SEATING
BASE ASSEMBLY
1. Place the 5-Star Chair Base (black plastic or chrome) on a clean, flat
surface with bottom facing up (Fig. 1).
2. Install all (5) Casters into the Base (the stem of the caster should snap
into place) and then flip the Base upright, with wheels facing down (Fig.
2 & 3).
3. Push the stem of the Gas Cylinder into the 5-Star Chair Base (Fig. 3).
4. Slide the Foot Ring (optional) over the Gas Cylinder and tighten the
Foot Ring Knob (Fig. 4).
5. Install the Stool Seat over the end of the Gas Cylinder and push down
firmly on stool seat (Fig. 5).
BACK ASSEMBLY (FOR MODELS WITH BACKS ONLY)
6. Slide the steel Slotted Back Strap into the Stool Swivel Plate (Fig. 6).
7. Insert the Back (depth) Adjusting Knob to lock
the Slotted Back Strap into place (Fig. 7 & 8).
ASSEMBLY IS COMPLETE.
Page 8 of 13
manual
Document No.: 006350 - Revision: A
FIG. 6
FIG. 1
FIG. 4
FIG. 8
FIG. 7
FIG. 2
FIG. 3
FIG. 5
Advertisement
Table of Contents
