Using The Copy Function; How To Copy - Develop ineo 4050 Quick Manual

5.4

Using the copy function

5.4 Using the copy function
5.4.1

How to copy

1
Load the original.
2
Tap [Copy].
3
If necessary, configure copy settings.
% Before scanning the original on this machine, you need to specify the size of the original to be
scanned. Before scanning the original, specify the original size in [Original Size]. If you fail to set the
original size correctly, the image may be cut off.
% For details on various copy settings, refer to page 5-17.
% The setting change is reflected on the image of [Output]. Therefore, you can configure the settings
while checking the output image.
ineo 4050/4750
5
5-15