Option Configuration - Develop ineo 4050 Quick Manual

2.1 About this machine
2.1.2

Option configuration

No. Name
1 Keypad KP-P01
2 Authentication Unit
AU-201/AU-201S
3 Finisher FS-P02
4 Paper Feed Unit
PF-P11
5 Paper Feed Unit
PF-P12
6 DESK DK-P02
The following optional components are built into this machine and are not shown in the figure above.
7 Fax Kit FK-512
8 Mount Kit MK-P03
9 Local Interface Kit
EK-P04
10 i-Option LK-101 v3
11 i-Option LK-106
12 i-Option LK-107
13 i-Option LK-108
14 i-Option LK-111
15 Network Interface
Card NC-P03
ineo 4050/4750
6
Description
Located on the side of the Control Panel.
Allows you to enter numbers by using the Hardware Keypad.
Performs user authentication by scanning information recorded on
the IC card or the NFC-compatible mobile terminal (Android terminal).
Staples the printed sheets.
For staples, use Staple Kit SK-501.
Allows you to load up to 250 sheets of paper.
There are three slots in which the Paper Feed Unit can be installed.
Allows you to load up to 550 sheets of paper.
There are three slots in which the Paper Feed Unit can be installed.
Used to install this machine on the floor.
This component may not be able to be used depending on the region
the machine is used in.
Used to operate this machine as a fax machine.
This unit is required to install the Fax Kit.
Used to add an RS-232C port.
Supports the web browser function that is one of the advanced func-
tions.
Used to add a bar code font, which is one of special fonts.
Used to add a unicode font, which is one of special fonts.
Used to add an OCR font, which is one of special fonts.
Supports the ThinPrint function, which is one of a number of ad-
vanced functions.
Enables use of this machine in a wireless network environment.
5 4
2
1
2
3
2-5