NETGEAR Prosafe GS700TP Software Administration Manual page 114

GS700TP Smart Switch Software Administration Manual
To add ports or LAGs to the Voice VLAN:
1. Click Switching > Voice VLAN > Advanced > Port Setting. The Port Setting screen opens:
Figure 4-18
The Voice VLAN Port Setting screen contains the following fields:
• Interface – Displays the interface for which the Voice VLAN settings are applied.
• Voice VLAN Mode – Select the Voice VLAN mode. The possible field values are:
– None – Maintain the current Voice VLAN port/LAG settings. This is the default value.
– Auto – Enable the port/LAG to join the Voice VLAN if traffic with an IP Phone MAC
Address is transmitted on the port/LAG. The port/LAG is aged out of the voice VLAN
if the IP phone's MAC address (with an OUI prefix) is aged out and exceeds the
defined aging time. If the MAC Address of the IP phones OUI was added manually to
a port/LAG in the Voice VLAN, the user cannot add it to the Voice VLAN in Auto
mode, only in Manual mode.
• Voice VLAN Security – Select the port/LAG security mode on the Voice VLAN. Port
Security ensures that packets arriving with an unrecognized OUI are dropped.
– Enable – Enable port/LAG security on the Voice VLAN.
– Disable – Disable port/LAG security on the Voice VLAN. This is the default value.
Configuring Switching Settings
v1.0, April 2008
4-27