NETGEAR Prosafe GS700TP Software Administration Manual page 49

GS700TP Smart Switch Software Administration Manual
The device supports SNMP notification filters based on Object IDs (OIDs). OIDs are used by the
system to manage device features. SNMP v3 supports the following features:
• Security
• Feature Access Control
• Traps. The device generates copy traps.
The SNMP menu contains the following options:
• "SNMPv1/v2"
• "SNMPv3"
SNMPv1/v2
The SNMPv1/v2 menu contains the following options:
• "Community Configuration"
• "Trap Configuration"
Community Configuration
Access rights are managed by defining communities in the Community Configuration screen.
When community names are changed, access rights are also modified.
To configure SNMP communities:
1. Click System > SNMP > SNMPv1/v2 > Community Configuration. The Community
Configuration screen displays:
Figure 3-9
The SNMPv1/v2 Community Configuration screen contains the following fields:
• Management Station – Enter the management station IP address for which the Basic
SNMP community is defined.
3-14
v1.0, April 2008
Managing System Settings