NETGEAR Prosafe GS700TP Software Administration Manual page 133

GS700TP Smart Switch Software Administration Manual
3. Select the Multicast Address from the list in the provided field.
4. Select the interface entry in the Multicast Group table.
5. Select the Interface Status from the list in the provided field in the first row.
6. Click APPLY to update the device.
Multicast Forward All
The Multicast Forward All screen contains fields for attaching ports or LAGs to a device that is
attached to a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast
packets are forwarded only to the appropriate port or VLAN.
To define Multicast forward all settings:
1. Click Switching > Multicast > Advanced > Multicast Forward All. The Multicast Forward
All screen displays:
Figure 4-29
The Multicast Forward All screen contains the following information:
Multicast Forward All
• VLAN ID – Enter the VLAN ID.
• VLAN Name – Displays the user defined VLAN name.
4-46
v1.0, April 2008
Configuring Switching Settings