NETGEAR Prosafe GS700TP Software Administration Manual page 96

GS700TP Smart Switch Software Administration Manual
To define LAG parameters:
1. Click Switching > LAG > Advanced > LAG Configuration. The Advanced LAG
Configuration screen displays:
Figure 4-5
The Advanced LAG Configuration screen contains the following fields:
• Interface – Displays the LAG number.
• Description – Enter a user-defined LAG description.
• Status – Select the current link operation. The possible field values are:
– Up – The LAG is currently linked and forwarding traffic.
– Down – The LAG is currently not linked.
• Reactivate Suspended – Select the action to apply to a suspended LAG. The possible
field values are:
– Enable – Reactivate the suspended LAG.
– Disable – Do not reactivate the suspended LAG.
• Type – Displays the LAG Type. The possible field values are:
– Static – The LAG is configured manually.
– LACP – The LAG is configured automatically.
• Speed – Select the data transmission rate for the LAG. The LAG type determines what
speed setting options are available. LAG speeds can only be configured when auto
negotiation is disabled. The possible field values are:
Configuring Switching Settings
v1.0, April 2008
4-9