NETGEAR Prosafe GS700TP Software Administration Manual page 119
Smart switch
Hide thumbs
Also See for Prosafe GS700TP:
- Software administration manual (251 pages) ,
- Software user manual (184 pages) ,
- Installation manual (41 pages)
Table of Contents
Advertisement
GS700TP Smart Switch Software Administration Manual
•
"CST Configuration"
•
"CST Port Configuration"
•
"Rapid STP"
STP Configuration
The Advanced STP Configuration screen contains parameters for enabling STP on the device.
To configure STP on the device:
1. Click Switching > STP > Advanced > STP Configuration. The Advanced STP
Configuration screen displays:
Figure 4-21
The Advanced STP Configuration screen contains the following fields:
Global Settings
•
Spanning Tree State – Select the STP state on the device. The possible field values are:
–
Enable – Enable STP on the device.
–
Disable – Disable STP on the device.
•
STP Operation Mode – Select the STP mode on the device. The possible field values are:
–
STP – Enable classic STP on the device.
–
RSTP – Enable Rapid Spanning Tree (RSTP) on the device.
4-32
v1.0, April 2008
Configuring Switching Settings
Advertisement
Table of Contents
