NETGEAR Prosafe GS700TP Software Administration Manual page 154

GS700TP Smart Switch Software Administration Manual
3. Click DELETE to remove the entry.
Accounting Server Configuration
RADIUS accounting enables recording of device management sessions (web login/logout but not
SNMP) as well as 802.1x authentication sessions.
To configure RADIUS Accounting Servers:
1. Click Security > Management Security > RADIUS > Accounting Server Configuration.
The RADIUS Accounting Server Configuration screen displays:
Figure 6-3
The RADIUS Accounting Server Configuration screen contains the following fields:
• Accounting Mode – Select the RADIUS accounting method. The possible field values
are:
– None – RADIUS accounting is disabled. This is the default.
– 802.1x – 802.1X authentication sessions are recorded.
– Login – Device management (Web login and logout) sessions are recorded.
– Both – Both 802.1X authentication and device management sessions are recorded.
• Accouting Server Address – Select the RADIUS Accounting Server IP address.
• Accounting Port – Enter the RADIUS Accounting port number. The accounting port is
used to handle RADIUS server accounting. The field default is 1813.
2. Select the RADIUS Accounting Mode from the list in the provided field.
3. Select the RADIUS Accounting Server Address from the list in the provided field.
4. Enter the RADIUS Accounting Port in the provided field.
Managing Security
v1.0, April 2008
6-5