NETGEAR Prosafe GS700TP Software Administration Manual page 77

GS700TP Smart Switch Software Administration Manual
LLDP-MED Port Settings
The LLDP-MED Port Settings screen contains parameters for assigning LLDP-MED network
policies to specific ports.
To configure LLDP-MED port settings:
1. Click System > LLDP > Advanced > LLDP-MED Port Settings. The LLDP-MED Port
Settings screen displays:
Figure 3-25
The LLDP-MED Port Settings screen contains the following fields:
• Port – Select the port to configure.
• LLDP-MED Status – Select the LLDP-MED status for the selected port. The possible
field values are:
– Enable – Enable LLDP-MED on the selected port.
– Disable – Disable LLDP-MED on the selected port.
• Notification – Select the notification status for the selected port. The possible field values
are:
– Enable – Enable notification on the selected port.
– Disable – Disable notification on the selected port.
• Network Policies – Click on the gold button to select the network policy numbers to apply
to the selected port.
2. Select the Port from the list in the provided field.
3-42
v1.0, April 2008
Managing System Settings