NETGEAR Prosafe GS700TP Software Administration Manual page 84
Smart switch
Hide thumbs
Also See for Prosafe GS700TP:
- Software administration manual (251 pages) ,
- Software user manual (184 pages) ,
- Installation manual (41 pages)
Table of Contents
Advertisement
GS700TP Smart Switch Software Administration Manual
The Neighbors Information window contains the following fields:
Port Details
•
Local Port – Displays the port number.
•
MSAP Entry – Displays the device's Media Service Access Point (MSAP) entry number.
Basic Details
•
Chassis ID Subtype – Displays the chassis ID subtype. For example, MAC address.
•
Chassis ID – Displays the chassis identification of the device transmitting the LLDP
frame.
•
Port ID Subtype – Displays the port ID subtype. For example, IPv4 address.
•
Port ID – Displays the port identification of the port transmitting the LLDP frame.
•
Port Description – Displays information about the port, including manufacturer, product
name and hardware/software version.
•
System Name – Displays the administratively assigned device name.
•
System Description – Describes the device. For example, system hardware type and
version, operating system and network software.
•
System Capabilities – Describes the primary device function. For example: Bridge,
Router.
Managed Address
•
Address Subtype – Displays the managed address subtype. For example, MAC or IPv4.
•
Address – Displays the managed address.
•
Interface Subtype – Displays the port subtype.
•
Interface Number – Displays the port number.
MAC/PHY Details
•
Auto-Negotiation Supported – Displays the port speed auto-negotiation support status.
The possible values are:
–
True – Auto-negotiation is supported on the port.
–
False – Auto-negotiation is not supported on the port.
•
Auto-Negotiation Enabled – Displays the port speed auto-negotiation active status. The
possible values are:
–
Enabled – Auto-negotiation is enabled on the port.
Managing System Settings
v1.0, November 2007
3-49
Advertisement
Table of Contents
