NETGEAR Prosafe GS700TP Software Administration Manual page 108
Smart switch
Hide thumbs
Also See for Prosafe GS700TP:
- Software administration manual (251 pages) ,
- Software user manual (184 pages) ,
- Installation manual (41 pages)
Table of Contents
Advertisement
GS700TP Smart Switch Software Administration Manual
To configure Port PVID parameters:
1. Click Switching > VLAN > Advanced > Port PVID Configuration. The Port PVID
Configuration screen displays:
Figure 4-15
The Port PVID Configuration screen contains the following fields:
•
Interface – Displays the interface id (port number or LAG number) to which the PVID tag
is assigned.
•
PVID – Enter the PVID value. The possible field range is 1-4093.
2. Select an interface.
3. Enter the PVID in the provided field in the first row.
4. Click APPLY to update the device.
Configuring Switching Settings
v1.0, April 2008
4-21
Advertisement
Table of Contents
