Chapter 2 Getting Started; Starting Up And Shutting Down The Dvr - HIKVISION HWD Series User Manual

2.1 Starting Up and Shutting Down the DVR

Purpose
Proper startup and shutdown procedures are crucial to expanding the life of the DVR.
Before you start
Check that the voltage of the extra power supply is the same with the DVR's requirement, and the
ground connection is working properly.
Starting up the DVR
Step 1 Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended
that an Uninterruptible Power Supply (UPS) be used in conjunction with the device.
Step 2 Turn on the power switch on the rear panel, and the Power indicator LED should turn on
indicating that the unit begins to start up.
Step 3 After startup, the Power indicator LED remains on.
Shutting down the DVR
Step 1 Go to Menu > Shutdown.
Step 2 Click Shutdown.
Step 3 Click Yes.
Step 4 Turn off the power switch on the rear panel when the note appears.
Digital Video Recorder User Manual

Chapter 2 Getting Started

Figure 2-1 Shutdown Menu
Figure 2-2 Shutdown Tips
24