Logging In Via Unlock Pattern - HIKVISION HWD Series User Manual

Connect at least 4 dots to draw the pattern.
Each dot can be connected for once only.
Step 2 Draw the same pattern again to confirm it. When the two patterns match, the pattern is
configured successfully.
If the two patterns are different, you must set the pattern again.

2.3.2 Logging in via Unlock Pattern

Only the admin user has the permission to unlock the device.
Please configure the pattern first before unlocking. Please refer to Chapter 2.3.1 Configuring
the Unlock Pattern.
Step 1 Right click the mouse on the screen and select the menu to enter the interface.
Digital Video Recorder User Manual
Figure 2-10 Confirm the Pattern
Figure 2-11 Reset the Pattern
28