HIKVISION HWD Series User Manual page 80

Step 2 Select a Camera.
Step 3 Configure the detection rules for VCA events. For details, see the step 6 in Chapter 10.3
Line Crossing Detection.
Step 4 Click the icon
Select Trigger Channel tab and select one or more channels which will start to record when
VCA alarm is triggered.
Step 5 Click Apply to save the settings.
Step 6 Enter Record Schedule Settings interface (Menu> Record> Schedule>Record Schedule),
and then set Event as the record type. For details, see step 2 in Chapter 5.2 Configuring
Recording and Capture Schedule.
Digital Video Recorder User Manual
Figure 5-20 VCA Settings
to configure the alarm linkage actions for the VCA events.
Figure 5-21 Set Triggered Camera of VCA Alarm
79