HIKVISION HWD Series User Manual page 69

Step 2 Set the parameters for recording.
1) Select the Record tab to configure.
2) Select a camera from the camera drop-down list.
3) View the Camera Resolution.
When Turbo HD, AHD, or HDCVI input is connected, you can view the information including the
input signal type, resolution and frame rate (e.g., 1080P30). When CVBS input is connected, you can
view the information such as NTSC or PAL.
4) Configure the following parameters for the Main Stream (Continuous) and the Main
Stream (Event).
Stream Type: Set the stream type to be Video or Video & Audio.
Resolution: Set recording resolution.
HWD-7108MH-G2 and HWD-7216MH-G2 series DVR support up to 8 MP resolution of all
the channels.
HWD-7104MH-G2 series DVR support up to 5 MP resolution of all the channels.
HWD-6200MH-G2 series DVR support up to 4 MP lite resolution of all the channels.
The 3 MP signal input is available for channel 1 of HWD-6200MH-G2 series DVR with 4
video inputs, for channel 1/2 of HWD-6200MH-G2 series DVR with 8 video inputs, and for
channel 1/2/3/4 of HWD-6200MH-G2 series DVR with 16/24/32 video inputs.
The analog signal inputs (Turbo HD, AHD, HDCVI, CVBS) and IP signal input can be
recognized and connected automatically.
If the configured encoding resolution conflicts with the resolution of the front-end camera, the
encoding parameters will adjust automatically to meet the front-end camera. E.g., if the
Digital Video Recorder User Manual
Figure 5-3 Record Parameters
68