Step 5: Connect The Magnetic Mount Antenna And Powerconnect Power Adapter - Sirius XM RAdio SXPL1H1 User Manual

Installation
2. Continue tucking the cable underneath the windshield molding around the windshield to the
lowest corner.
3. At the lowest corner of the windshield, route the cable out of the windshield molding and into the
rubber weather stripping around the door opening. Lift the weather stripping from the opening
and tuck the cable inside it, then replace the weather stripping. Run the cable inside of the
weather stripping to the bottom of the door opening.
4. Pull the cable out of the weather stripping at the bottom of the door opening and route it under
the carpet toward the dashboard. Coil any excess cable in a hidden location, such as under the
carpet, keeping it away from any vehicle pedals or controls. Secure the
excess cable with wire ties.
5. Bring the end of the cable out at the PowerConnect Vehicle Dock
location. Leave yourself enough cable so you can easily connect it to the
antenna connector of the dock.
6. Continue with "Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter" on page 20.
Step 5: Connect the Magnetic Mount Antenna and PowerConnect
Power Adapter
1. Plug the Magnetic Mount Antenna into the silver ANT connector on the
PowerConnect Vehicle Dock.
2. Insert the PowerConnect Power Adapter into your vehicle's cigarette lighter
or power adapter socket.
3. Plug the PowerConnect Power Adapter into the red PWR connector on
the dock.
20
Onyx Plus User Guide
AUDIO ANT PWR FM
AUDIO ANT PWR FM