Table of Contents
Advertisement
Installation
Option 1: Aux In Cable Installation Instructions
1. Plug one end of the Aux In Cable into the green AUDIO connector on the dock.
2. Plug the other end into the auxiliary input jack of your vehicle's stereo
system.
3. If you are using the vent mounting method, attach the Vent Mount to the
vehicle vent.
4. Insert your Onyx Plus into the dock.
5. Power on your Onyx Plus by pressing the Power button.
6. Be sure the vehicle is outside and the antenna has a clear view of the sky.
Verify that you are receiving the XM signal. There should be at least two
bars on the lower left corner of the main display screen that denotes
antenna signal strength. You can also press menu and then press
down
to scroll to and highlight Signal Indicator. Press the Select
button. The Satellite and Terrestrial bars show the strength of the
signal being received. If the signal reception is good, press and hold
menu to return to the main display screen.
7. Ensure Onyx Plus is tuned to channel 1, the XM Preview channel. Upon
power up, Onyx Plus should tune to channel 1 by default, when it's not
yet activated. If it's not on channel 1, refer to "Tuning to a Channel" on
page 30 to learn about how to tune a channel.
8. Turn on your vehicle's stereo system. Set it to play from the auxiliary
input source. You should hear XM channel 1 through your vehicle's
stereo system. You are now ready to activate your Onyx Plus.
9. Go back to "Step 2: Install the Adhesive or Vent Mount" on page 11
and finish installing the Dash or Vent Mount. Then the installation is
complete.
10. The audio level output of Onyx Plus can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle.
Refer to "Audio Level" on page 75.
If the signal reception is good, showing at least two bars in the lower left corner of the display, but
there is no XM audio, be sure the vehicle's stereo system is set to the auxiliary input source (step 8).
Also be sure that the audio level is set high enough to be heard (step 10). Refer to "Troubleshooting
1" on page 83 for additional help.
22
AUDIO
ANT
PWR
FM
Plus
1
2
3
4
5
Onyx Plus User Guide
FM
menu
alerts
t-mix
t-scn
twx
6
7
8
9
0
b / #
Advertisement
Table of Contents
