Step 5: Connect The Magnetic Mount Antenna And Powerconnect Power Adapter - Sirius XM RAdio ONYX EZR User Manual

Installation
2. Continue tucking the cable underneath the windshield molding around the windshield to the
lowest corner .
3. At the lowest corner of the windshield, route the cable out of the windshield molding and into the
rubber weather stripping around the door opening . Lift the weather stripping from the opening
and tuck the cable inside it, then replace the weather stripping . Run the cable inside of the
weather stripping to the bottom of the door opening .
4. Pull the cable out of the weather stripping at the bottom of the door opening and route it under
the carpet toward the dashboard . Coil any excess cable in a hidden location, such as under the
carpet, keeping it away from any vehicle pedals or controls . Secure the
excess cable with wire ties .
5. Bring the end of the cable out at the PowerConnect Vehicle Dock
location . Leave yourself enough cable so you can easily connect it to the
antenna connector of the dock .
6. Continue with "Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter" on page 18 .
Step 5: Connect the Magnetic Mount Antenna and PowerConnect
Power Adapter
1. Plug the Magnetic Mount Antenna into the silver ANT connector on the
PowerConnect Vehicle Dock .
2. Insert the PowerConnect Power Adapter into your vehicle's cigarette lighter
or power adapter socket .
3. Plug the PowerConnect Power Adapter into the red PWR connector on
the dock .
18
Onyx EZR with Vehicle Kit User Guide
AUDIO ANT PWR FM
AUDIO ANT PWR FM