Table of Contents
Advertisement
Onyx Plus User Guide
Use a blunt plastic putty
knife or similar blunt tool
to lift edge of interior
trim and tuck cable
under trim. Continue
towards front of vehicle
TIP! Always be careful to include enough slack in your cable to accommodate open doors
or trunk lids. Use things typically found around the home, like electrical tape, to secure
cables in areas so that hinges do not pinch the cable with the door. Hide any excess cable
in the trim.
Route cable under
trim or upholstery
Continue routing cable
under trim or carpet
towards front of vehicle
Route cable from trunk
under interior trim, into
cabin and towards front
of vehicle
Continue routing cable under
carpet or console to radio location
Pull carpet
or mat back
Bring cable out from trim
and route under carpet to
dashboard or console
Installation
Coil excess
cable under
carpet or mat
Bring cable out
from trim
17
Advertisement
Table of Contents
