Related Manuals for Alfa IN PAN 161
Summary of Contents for Alfa IN PAN 161
- Page 1 1/11 WELDING INVERTER PAN 161 OPERATING MANUAL ALFA IN a.s. © www.alfain.eu PAN 161 MANUAL EN 03...
-
Page 2: Table Of Contents
SAFETY INSTRUCTIONS AND WARNINGS ..........4 TECHNICAL DATA ..................6 EQUIPMENT ..................... 7 OPERATOR CONTROLS ................7 GETTING STARTED ................. 8 ROUTINE MAINTENANCE & INSPECTION ..........9 STATEMENT OF WARRANTY ..............10 DISPOSAL ....................11 10. WARRANTY LIST .................. 11 ALFA IN a.s. © www.alfain.eu... -
Page 3: Introduction
3/11 1. INTRODUCTION Congratulations on your new ALFA IN product. We are proud to have you as our customer and will strive to provide you with the best service and reliability in the industry. This Operating Manual has been designed to instruct you on the correct use and operation of your ALFA IN product. -
Page 4: Safety Instructions And Warnings
THERE IS A VERY HIGH RISK OF EXPLOSION. The operator must be aware of all the special regulations which he needs to conform to when welding in enclosed spaces with a high risk of ALFA IN a.s. © www.alfain.eu... - Page 5 The welding machines of this type can be marked with the symbol: Before opening the machine switch off the machine and disconnect it from the power socket. Only personnel authorised by this company can carry out maintenance on the machine. ALFA IN a.s. © www.alfain.eu...
-
Page 6: Technical Data
115 x 320 x 212 Weight ALFA IN continuously strives to produce the best product possible and therefore reserves the right to change, improve or revise the specifications or design of this or any product without prior notice. Such updates or changes do not entitle the buyer of equipment previously sold or shipped to the corresponding changes, updates, improvements or replacement of such items. -
Page 7: Equipment
6124 Pressure Reducer BASECONTROL Ar 2 manometers 6125 Pressure Reducer BASECONTROL CO2 2 manometers S777c. Light Reactive Welding Helmet Barracuda S777C 706.1057 Torch SRT17 V 4m BSB10-25 5. OPERATOR CONTROLS Fig . 1 Main parts ALFA IN a.s. © www.alfain.eu... -
Page 8: Getting Started
2. Connect the work lead to positive terminal 6 and fasten it by turning the connector to the right. 3. Connect the work clamp to the work piece or at the welding table. 4. By means of the switch 4 select TIG ALFA IN a.s. © www.alfain.eu... -
Page 9: Routine Maintenance & Inspection
WARNING 2. Disconnect the PAN 161 from the mains supply voltage before disassembling. 3. Special maintenance is not necessary for the control unit parts in the Welder. -
Page 10: Statement Of Warranty
3. ALFA IN will repair or replace, at its discretion, any warranted parts or components that fail due to defects in material or workmanship within the warranty period. -
Page 11: Disposal
11/11 an ALFA IN distributor or an Authorised Service Agent approved by the company ALFA IN. 9. As a warranty list serves proof of purchase (invoice) on which is the serial number of the machine, eventually a warranty list on the last page of this manual.
Need help?
Do you have a question about the PAN 161 and is the answer not in the manual?
Questions and answers