Subscribe to Our Youtube Channel
Related Manuals for Alfa IN PEGAS 161 E softswitch
Summary of Contents for Alfa IN PEGAS 161 E softswitch
- Page 1 WELDING INVERTER PEGAS 161 E softswitch OPERATING MANUAL ALFA IN a.s. © www.alfain.eu PEGAS 161 E softswitch Manual EN 02...
-
Page 2: Table Of Contents
SAFETY INSTRUCTIONS AND WARNINGS ..........4 TECHNICAL DATA ..................6 EQUIPMENT ..................... 7 OPERATOR CONTROLS ................8 GETTING STARTED ................. 9 ROUTINE MAINTENANCE & INSPECTION ..........10 STATEMENT OF WARRANTY ..............10 DISPOSAL ....................11 10 WARRANTY LIST ..................11 ALFA IN a.s. © www.alfain.eu... -
Page 3: Introduction
3/11 INTRODUCTION Congratulations on your new ALFA IN product. We are proud to have you as our customer and will strive to provide you with the best service and reliability in the industry. This Operating Manual has been designed to instruct you on the correct use and operation of your ALFA IN product. -
Page 4: Safety Instructions And Warnings
THERE IS A VERY HIGH RISK OF EXPLOSION. The operator must be aware of all the special regulations which he needs to conform to when welding in enclosed spaces with a high risk of explosion. ALFA IN a.s. © www.alfain.eu... - Page 5 The welding machines of this type can be marked with the symbol: Before opening the machine switch off the machine and disconnect it from the power socket. Only personnel authorised by this company can carry out maintenance on the machine. ALFA IN a.s. © www.alfain.eu...
-
Page 6: Technical Data
112 x 274 x 215 Weight ALFA IN continuously strives to produce the best product possible and therefore reserves the right to change, improve or revise the specifications or design of this or any product without prior notice. Such updates or changes do not entitle the buyer of equipment previously sold or shipped to the corresponding changes, updates, improvements or replacement of such items. -
Page 7: Equipment
Welding Helmet Barracuda S777C Black 706.1057 Torch SRT17 V 4m BSB10-25 712.A011 Set SR17/18/26d=1,6 712.A012 Set SR17/18/26d=2,4 712.A013 Set SR17/18/26d=3,2 700.1184 Electrode wolf.WL15 1.6x175 gold 700.1186 Electrode wolf.WL15 2.4x175 gold 700.1187 Electrode wolf.WL15 3.2175 gold ALFA IN a.s. © www.alfain.eu... -
Page 8: Operator Controls
FRONT PANEL Fig . 1 Main parts Pos. Description LED ON LED over heating Current potentiometer Method switch MMA (electrode)/TIG Panel quick connector - Panel quick connector + Mains socket with a plug ON/OFF switch ALFA IN a.s. © www.alfain.eu... -
Page 9: Getting Started
5. Open the gas cylinder valve, open the valve on the TIG torch and adjust the gas flow on the gas regulator. The flow rate will be shown at the flow meter. This should be done according the table below. ALFA IN a.s. © www.alfain.eu... -
Page 10: Routine Maintenance & Inspection
3. ALFA IN will repair or replace, at its discretion, any warranted parts or components that fail due to defects in material or workmanship within the warranty period. -
Page 11: Disposal
11/11 6. Equipment that has been modified by any other party other than ALFA IN’s own service personnel or with prior written consent obtained from ALFA IN Service Department. 7. Equipment that has been used beyond the specifications established in the operating manual.
Need help?
Do you have a question about the PEGAS 161 E softswitch and is the answer not in the manual?
Questions and answers