Table of Contents
Advertisement
VIA SOM-3000-STK Android 12.0 EVK Quick Start Guide
Step 2
Insert the other plug connector of the 4-pin FFC cable into the 4-pin FFC port located on the USB to UART
debug board, ensuring that the gold finger of the FFC cable faces down.
FCC Port
Step 3
Connect the Windows 10 host machine and the USB to UART debug board through the Micro USB 2.0 port
using the Micro USB cable.
Step 4
Use a serial port communication program such as PuTTY or Tera Term to connect the debug console. Set the
console Baud Rate to "921600".
Step 5
Power on the VIA SOM-3000 starter kit to initiate the boot process.
Step 6
When the VIA SOM-3000 starter kit has completed booting, log in to the debug console.
3.2 Changing the Kernel Debug Level
To disable the kernel messages, modify the debug level using the following command:
console:/ # su
console:/ # echo 3 > /proc/sys/kernel/printk
3.3 Checking the BSP Version
7
Advertisement
Table of Contents
