Lenovo ThinkEdge SE360 V2 System Configuration Manual page 47

Status
On
Off
2 10 XCC WLAN activity LED (green)
The WLAN activity LED helps you identify the status of WLAN connection.
Status
On
Off
3 9 Security LED (green)
The states of security LED are as following:
Solid on: The server is operating with security feature enabled.
Blinking: The server is in System Lockdown Mode. Activate or unlock the system for operation. See
"Activate or unlock the system" on page
Off: No security feature is enabled on the server.
4 8 System Error LED (yellow)
The system error LED helps you to determine if there are any system errors.
Status Color
On Yellow
Off None
5 Bluetooth LED (blue)
Press the Bluetooth button to enable Bluetooth. After the Bluetooth button is pressed, if SE360 V2 does not
pair with any Bluetooth devices within 10 minutes, Bluetooth will be disabled automatically. Identify the
status of Bluetooth with the Bluetooth LED.
Color Description
Green The x86 WLAN is operating properly.
None The x86 WLAN RF is turned off, or the x86 WLAN is not operating properly, or the
server does not come with wireless module.
Color Description
Green There is XCC WLAN connection.
None The is no XCC WLAN connection, or the server does not come with wireless
module.
67.
Description
An error has been detected on the server.
Causes might include one or more of the
following errors:
• The temperature of the server reached
the non-critical temperature threshold.
• The voltage of the server reached the
non-critical voltage threshold.
• A fan has been detected to be running at
low speed.
• The power supply has a critical error.
• The power supply is not connected to
the power.
The server is off or the server is on and is
working correctly.
14 Bluetooth button with LED (blue)
Action
Check the Event log to determine the exact
cause of the error.
None.
.
Chapter 2 Server components
39