Tv Output Signal; Printer - Toshiba Satellite M30-SP350 User Manual

TV output signal

Refer also to your Personal Conferencing Kit's documentation.
Problem
Display on TV is poor
No display

Printer

Refer also to the Parallel printer sections in Chapter 8, Optional Devices,
and to the troubleshooting and other relevant sections in your printer and
software documentation.
Problem
Printer does not turn
on.
Computer/printer do
not communicate
Printer error
Satellite M30 Series
Procedure
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5, Keyboard.
If you turn the computer off in Standby mode
while the display is on TV, the computer will
select either the internal LCD or an external
computer CRT as the display device.
If problems persist, contact your dealer.
Procedure
Check that the printer is connected to an electric
outlet. Make sure the outlet is supplying power
by plugging in an appliance.
Make sure the printer is turned on and is online
(ready to use).
Inspect the cable connecting the printer to the
computer for damage. Make sure it is securely
connected.
A parallel printer connects to the parallel port.
Make sure the port is configured correctly. Refer
to Chapter 7, HW Setup.
Make sure your software is configured to
recognize the printer. Check your printer and
software documentation.
Check your printer documentation.
If problems persist, contact your dealer.
Troubleshooting
9-20