Before Writing Or Rewriting - Toshiba Satellite M30-SP350 User Manual

Toshiba satellite m30-sp350: user guide
Table of Contents

Advertisement

There are two types of DVD discs: authoring and general use discs.
Do not use authoring discs. Only general use discs can be written to
by a computer drive.
You can use DVD-RAM discs that can be removed from a cartridge
and DVD-RAM discs designed without a cartridge. You cannot use a
disc with a 2.6 GB single-sided capacity or 5.2 GB double-sided
capacity.
Other DVD-ROM drives for computers or other DVD players may not
be able to read DVD-R/-RW discs.
You cannot overwrite data that has been previously written to a
DVD-RW disc.
You cannot partially delete any data written to a DVD-RW disc.
Data written to a CD-R/DVD-R disc cannot be deleted either in whole
or in part.
Data deleted (erased) from a CD-RW and DVD-RW/-RAM disc cannot
be recovered. Check the content of the disc carefully before you
delete it. If multiple drives that can write data to discs are connected,
be careful not to delete data from the wrong drive.
In writing to a DVD-R/-RW disc, some disc space is required for file
management, so you may not be able to write the full capacity of the
disc.
Since the disc is based on the DVD standard, it will be filled with
dummy data if the written data is less than about 1 GB. Even if you
write only a small amount of data, it might take time to fill in the
dummy data.
Two types of DVD-R/-RW/-RAM discs are on the market: data and
video. Use a video disc to store video data. You can use video discs
on a DVD recorder as well as on your computer's DVD-ROM drive.
You cannot use data discs on a DVD recorder.
DVD-RAM formatted by FAT32 cannot be read in Windows 2000
without DVD-RAM Driver Software.

Before writing or rewriting

Please observe the following points when you write or rewrite data.
When multiple drives that can write data to discs are connected, be
careful not to write to the wrong drive.
Be sure to connect the universal AC adaptor before you write or
rewrite.
Before you enter standby/hibernation mode, be sure to finish
DVD-RAM writing. Writing is finished if you can eject DVD-RAM
media.
Be sure to close all other software programs except the writing
software.
Do not run software such as a screen saver, which can put a heavy
load on the CPU.
Operate the computer in the full-power mode. Do not use power-
saving features.
Satellite M30 Series
Operating Basics
4-17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents