Connecting A Tv; Changing The Resolution - Toshiba Satellite M30-SP350 User Manual

TV
You can connect a television set to the S-Video out port on the computer.
Follow the steps below.

Connecting a TV

1. Turn the computer off.
2. Use a video cable (not supplied) to connect the TV adaptor cable's
mini-jack to the TV out port on the computer.
3. Connect the TV adaptor cable's S-Video jack to the S-Video jack on
the TV.
4. Turn the television on.
5. Turn the computer on.
You can use the hotkeys Fn + F5 to change the display device. Refer to
Chapter 5, The Keyboard.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below.
a. Click start and click Control Panel.
b. Double-click the Display icon to open the Display Properties window.
c. Click the Settings tab and click the Advanced button.
d. Click the nView Display Mode tab, click Device Settings and click
Select Output Device.
e. Select Advanced and select TV in the Device Selection window.
f. Select the Format box and select the format that your TV supports.

Changing the resolution

After you connect a TV (NTSC), follow the steps below to set the Display
resolution to 640 x 480.
1. Open Display properties and select the Settings tab.
2. Select Advanced.
3. Select the Adapter tab, then select List All Modes....
4. Select 640 by 480, High Color (16 bit), 60 Hertz.
Satellite M30 Series
Optional Devices
8-10