Printer
Refer also to the
the troubleshooting and other relevant sections in your printer and software
documentation.
An Advanced Port Replicator III Plus is equipped with a parallel port.
Problem
Printer does not turn on. Check that the printer is connected to an electric
Computer/printer do not
communicate
Printer error
TV output signal
Problem
Display on TV is poor
No display
User's Manual
Serial port
sections in Chapter 8,
Procedure
outlet. Make sure the outlet is supplying power by
plugging in an appliance.
Make sure the printer is turned on and is online
(ready to use).
Inspect the cable connecting the printer to the
computer for damage. Make sure it is securely
connected.
A parallel printer connects to the parallel port.
Make sure the port is configured correctly.
Make sure your software is configured to
recognize the printer. Check your printer and
software documentation.
Check your printer documentation.
If problems persist, contact your dealer.
Procedure
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5,
If problems persist, contact your dealer.
Troubleshooting
Optional
Devices, and to
The
Keyboard.
9-21