Controls For Cd/Dvd And Digital Audio - Toshiba Satellite M30-SP350 User Manual

Controls for CD/DVD and Digital Audio

The chart below describes controls for CD/DVD and Digital Audio.
Power is off and
you press
Play/Pause
OS is running and
you press
Play/Pause
You press Mode
Control for three
seconds
OS is running and
you press Mode
Control
If the computer power is off, the CD/DVD control functions only for the
optical media drive. If you want to control the optical media drive by
CD/DVD control when the OS is booted up, set the appropriate player
application software. You cannot play optical media, only by setting the
internal CD/DVD play drive on the Media Apps tab of the TOSHIBA
Controls.
To play Digital Audio Data, you must set the play list in the Windows
Media Player. The next time you play Digital Audio Data, the former play
list will become active. If a CD was played the previous time, then All
Audio will be used.
Do not install or remove a memory module while the optical media drive
power is on in CD Player mode. First press the Mode control button to
turn off the power to the optical media drive.
Satellite M30 Series
CD/DVD control
If an audio CD is in the
optical media drive, the
system enters CD Player
mode and operates as a
stand-alone CD player.
If a DVD is in the optical
media drive, the operating
system starts and the DVD
Video player starts.
If an audio CD is in the
optical media drive and CD
audio play begins.
If a DVD is in the optical
media drive, the DVD Video
player starts and DVD
Video play begins.
If power is on, it turns off.
If power is off it turns on in
CD player mode.
The mode changes to
Digital/Audio.
Operating Basics
Digital Audio
control
Operating system
starts and Digital
Audio Data play
begins.
Digital Audio Data
play begins.
If power is on, it turns
off.
The mode changes to
CD/DVD.
4-8