Removing memory module
To remove the memory module, make sure the computer is in boot mode
then:
1. Turn off the power and disconnect all cables from the computer.
2. Turn the computer upside down and remove the battery.
3. Loosen one screw securing the memory module cover and lift off the
cover.
4. Push the latches to the outside to release the module. A spring will
force one end of the module up.
5. Grasp the module by the sides and pull it out.
If you use the computer for a long time, the memory modules and the
circuits located close to the memory modules will become hot. In this
case, let them cool to room temperature before you replace them.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
6. Seat the memory module cover and secure it with one screw.
Satellite M30 Series
Removing the memory module
Optional Devices
8-8