Modem; Region Selection - Toshiba Satellite M30-SP350 User Manual

Modem

This section describes how to connect and disconnect the internal
modem to and from a telephone jack.
The internal modem does not support voice functions. All data and fax
functions are supported.
In case of a lightning storm, unplug the modem cable from the telephone
jack.
Do not connect the modem to a digital telephone line.
A digital line will damage the modem.

Region selection

Telecommunication regulations vary from one region to another, so you
will need to make sure the internal modem's settings are correct for the
region in which it will be used.
To select a region, follow the steps below.
1. Click start, point to All Programs, point to TOSHIBA, Networking
and click Modem Region Select.
Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the
Country/Region in the Control Panel, the change may not take effect.
2. The Region Selection icon will appear in the Windows Task Bar.
3. Click the icon with the primary mouse button to display a list of
regions that the modem supports. A sub menu for telephony location
information will also be displayed. A check will appear next to the
currently selected region and telephony location.
4. Select a region from the region menu or a telephony location from the
sub-menu.
■
■
Satellite M30 Series
When you click a region it becomes the modem's region selection,
and the New Location for telephony will be set automatically.
When you select a telephony location, the corresponding region is
automatically selected and it becomes the modem's current region
setting.
Operating Basics
4-22