Printer; Tv Output Signal - Toshiba tecra s3 User Manual

Troubleshooting

Printer

Refer also to the
and to the troubleshooting and other relevant sections in your printer and
software documentation.
Problem
Printer does not turn on. Check that the printer is connected to an electric
Computer/printer do not
communicate
Printer error

TV output signal

Problem
Display on TV is poor
No display
If you turn the computer off into Standby Mode while the display is on TV,
the computer will select either the internal LCD or an external computer
CRT as the display device the next time is switched on.
9-20
Parallel printer sections in Chapter 8,
Procedure
outlet. Make sure the outlet is supplying power by
plugging in an appliance.
Make sure the printer is turned on and is online
(ready to use).
Inspect the cable connecting the printer to the
computer for damage. Make sure it is securely
connected.
A parallel printer connects to the parallel port.
Make sure the port is configured correctly.
Make sure your software is configured to
recognize the printer. Check your printer and
software documentation.
Check your printer documentation.
If problems persist, contact your dealer.
Procedure
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5,
If problems persist, contact your dealer.
Optional
The Keyboard.
User's Manual
Devices,