Getting to Know the Windows ® XP Media Center Edition
Connecting the TV Signal Source When You Have an
Existing Setup
This section describes how to connect the signal source from
the wall to a VCR to a TV using coaxial cable.
1
Remove the coaxial cable from the VCR input, and
connect it to the input of a coaxial cable signal splitter
(not shipped with your computer or system).
2
Connect two coaxial cables to the splitter outputs.
3
Connect one of the coaxial cables to the VCR input, and
the other end to the coax port on the front side of the
computer.
4
Connect the coaxial cable.
NOTE
To connect your computer to a TV, you need a video/AV cable.
The type of cable depends on your TV.
Media Center Setup
137