Troubleshooting - Husqvarna T 4000 Petrol Operator's Manual

Hide thumbs Also See for T 4000 Petrol:
Table of Contents

Advertisement

Available languages

Available languages

6. Close the bottom of the Longopac dust bag with a
cable tie.

Troubleshooting

Problem
The product does not
start
The generator and the
fan operates but there is
no suction.
The generator and the
fan operates but the suc-
tion is unsatisfactory.
Dust is blown from en-
gine.
Unusual noise.
2065 - 001 - 12.06.2023
Troubleshooting
Cause
The product is not connected to the gener-
ator.
There is no power from the generator.
The hose is not connected.
The hose is clogged or blocked.
There is no Longopac bag.
The hose is damaged.
The prefilter is clogged.
The HEPA filter is clogged.
The top cover is loose.
There is dirt in the lid.
The prefilter or/and the HEPA filter are in-
correctly installed or damaged.
N/A
Solution
Connect the product to the generator.
Refer to the documentation for the genera-
tor.
Connect the hose.
Clean the hose.
Install a Longopac bag.
Replace the hose.
Clean the prefilter. If it is necessary, re-
place the prefilter.
Replace the HEPA filter.
Adjust the top cover.
Clean the lid.
Adjust or replace the prefilter or/and the
HEPA filter.
Do servicing on the product.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

967 97 33-01

Table of Contents