Husqvarna T 4000 Petrol Operator's Manual page 12

Hide thumbs Also See for T 4000 Petrol:
Table of Contents

Advertisement

Available languages

Available languages

To start and stop the product
Note:
The suction is not at full capacity directly at
start, the suction operates fully after 5 seconds.
To start the generator
WARNING:
generator a minimum of 30 seconds before
you start the dust extractor.
1. Make sure that the generator is on a level surface.
2. Open the fuel valve.
3. Set the power switch to the on position "I".
4. Set the choke to the OFF position.
 
 
5. Pull the starter rope handle slowly until you feel
resistance.
 
 
12
You must start the
I
O
6. Pull the starter rope handle quickly and with force
until the engine starts.
7. Move the choke to ½ choke position.
 
 
8. When the engine runs smoothly, set the choke to the
ON position.
 
 
To start the dust extractor
1. Make sure that the power indicator is on.
2065 - 001 - 12.06.2023

Advertisement

Table of Contents
loading

This manual is also suitable for:

967 97 33-01

Table of Contents