Advertisement
Section 3: Mounting
Flush Mount
Flush-mount Bracket Installation Notes:
See dimensional drawing for the exact details of the recommended enclosure panel
opening dimensions.
1. Place the 27-inch 2799 touchscreen display into your enclosure panel opening.
2. Attach flush mounting brackets (all four sides) with M4-5mm bracket screws (included)
to secure the touchscreen onto the enclosure panel. Adjust the touchscreen as close
as possible to flush with the front of the enclosure panel before tightening M4 bracket
screws. A socket wrench is recommended if clearance is limited.
3. Tighten the M4-6mm clamping screws on the mounting brackets to bring the
touchscreen glass completely flush with the customer panel, compressing the sealing
gasket, and ensuring a watertight seal to IP66 and NEMA4x standards.
Please ensure 2" clearance behind the touch screen display.
2
1
3
User Manual: ET2799L Touchscreen
UM600526 Rev B, page 7 of 31
Advertisement
