Chapter 3: Mounting - Elo TouchSystems ET1517L User Manual

Chapter 3: Mounting

Rear VESA Mount
For the 15 inch touchmonitor, a four-hole 75x75mm mounting pattern for M4 screws is provided on
the rear of the monitor. Remove the stand using a Phillips screwdriver to access this mounting
interface. The VESA FDMI-compliant counting is coded: VESA MIS-B, 75, C.
For the 17 inch touchmonitor, a four-hole 75x75mm mounting pattern for M4 screws is provided
on the rear of the monitor. Remove the stand using a Phillips screwdriver to access this
Elo Touch Solutions | 670 N. McCarthy Blvd., Suite 100 | Milpitas, CA 95035 | 800 ELO TOUCH | +1 408 597 8000 | www.elotouch.com