Shut Down The Laser; Bluetooth App Operation Description - Raycus RFL-C Series User Manual

4.8.6 Red Light Control
Turn on the air switch, wait for 20 s, the laser enters the red- light external
control mode, and a high level of 5-20V is given before the 17-20 feet. If red light
internal control is selected on the host computer, you can use the host computer to
click "red light on" to turn on the red light.
 Laser

4.9 Shut down the laser:

Please turn off the laser in the following sequence:
1) Turn off the laser output enable;
2) Turn off the air switch;
3) Turn off the chiller;
4) If the laser is not equipped with air conditioner, please ignore this
step; If it is equipped, please wait for the air conditioner to continue
working for 10min;
5) Put on the output head protection cap.

4 . 10 Bluetooth app operation description

4.10.1 Log in
After opening the single - mode laser app, there is an account password login
page, as shown in Figure 24:
and red
simultaneously
Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide of Global Version 1000 - 1500W CW laser
indicator light
Raycus User Guide | Using the Product
can be output
37