5 Installation and putting into operation
5.1 Safety
CAUTION! Electric energy hazard!
The improper installation of the electrically operated main clock may cause
injuries or damages of the unit. For that reason:
–
The unit shall be installed in accordance with the safety regulations by trained staff
qualified in electrical engineering only!
–
Before starting with the installation, make sure it is volt-free and prevent any
possibility of reconnection!
5.2 Requirements on the place of installation
The clock's construction is shake and shockproof. Nevertheless, the following conditions
apply when choosing an installation place:
–
no direct sunlight
–
ambient temperature: 0-40 °C
–
max. relative humidity 0-90 % without condensation
Special care has to be taken for the wall-mounting version:
ATTENTION! Material risk!
The mounting place has to be chosen so that the main clock does not obstruct
any motion areas of objects (e.g. doors) or people.
V3.2 12/2014
WEMPE digital main clock 20097
Installation and putting into operation
17