Table of Contents
Advertisement
3 Technical Data
3.1 General Data
case
dimensions
weight
display
control
oscillator
PPS signal
interfaces
secondary clocks
time adjustment intervals
3.2 Electrical Data
power supply
power reserve main clock 4 h (12 V accumulator with 0,7 Ah)
connections
V3.2 12/2014
material:
plastic (RAL 7035)
protection type:
IP54
mounting:
wall-mounting or console-mounting
version
wall-mounting case
(incl. terminal box):
console-mounting case
(incl. terminals):
wall-mounting case:
console-mounting case:
alphanumeric LC-display with 20 digits
switch-on/switch-off and dimmable display illumination
processor-controlled C-MOS technology
quartz-controlled with temperature compensation
accuracy:
0,05 s/24 h
The PPS impulse length should not be longer then 100ms
and should be at least 200ms send before the NMEA
protocol.
serial RS485 interface with standard protocol
GPS input RS422 & PPS input for synchronisation
2 relay outputs for alarm annunciators
further optional interfaces
up to 100 fwd. and 50 fwd. and bwd. adjustable clocks
analogue: all common clocks for 12V or 24V impulses
digital: with suitable extension card (optional)
± 1 min or in preset steps between 1 and 99 min
24 V DC, 300 mA
48-pole terminal strip
cable entry by VG screw connections
WEMPE digital main clock 20097
width: 257 mm
height: 217 mm
depth: 125 mm
width: 257 mm
height: 156 mm
depth: 142 mm
2,7 kg
1,7 kg
Technical Data
11
Advertisement
Table of Contents
