Operator's Responsibility; Installation And Operating Staff - WEMPE 20097/W Operating Instructions Manual

WEMPE digital main clock 20097
Safety

2.3 Operator's responsibility

These operating instructions shall be kept close to the unit so that they are at any time within
reach of the installation, operation and maintenance staff.
The operator and his authorized staff are responsible for the failure-free operation of the unit
as well as for the unequivocal appointment of responsibilities for installation, operation and
maintenance of the unit.
The unit shall only be used if its condition is faultless and safe to operate.
The instructions given in this operating manual are to be followed in their entity and without
exception.

2.4 Installation and operating staff

The unit shall only be installed and operated by authorized and trained staff or other qualified
personnel.
Any staff member that has been previously informed about the tasks assigned to him or her
as well as the possible risks in case of improper conduct and who has been trained
appropriately if necessary and who as been instructed about the necessary safety
dispositions and measures is regarded as trained staff.
Qualified staff is defined as any person who is able to evaluate the tasks assigned to him/her
and to realize any possible risk due to his/her professional training, knowledge and
experience as well as knowledge of the applicable regulations.
The operating company and the operating staff are equally responsible to make sure that no
non-authorized person operates or handles the unit. The operating staff is obliged to inform
the operating company without delay about any change of the unit, which could affect its
functioning or safety.
10
V3.2a 05/2015