Starting A Case Using Custom Settings - GE Carestation 750 Clinical Reference Manual

Starting a case using custom settings

Ideal Weight, Age, CO
2
starting a case.
1. Set the Bag/Vent switch to Bag.
2. Select Start Case.
• The Case Defaults selection shows the first preset case type
• Ideal Weight, Age, CO
the case type shown
3. Change Ideal Weight, Age, or Volume Apnea Alarm settings on the menu.
• The Case Defaults changes from the case name to Preset
• If the CO Alarms setting on the menu is changed, the Case Defaults remains as previously selected
2
4. To change ventilation mode, select Mode and make the change. To change the ventilation settings, select a
ventilator quick key or More Settings and make the change.
5. To change alarm settings, select Alarm Setup and make the change.
6. To change the gas settings or the circuit type, select Gas Setup and make the change.
7. From the Start Case menu, select Start Case Now. Gas flow starts.
Alarms, and Volume Apnea Alarm can be custom set on the Start Case menu before
6
Alarms, and Volume Apnea Alarm show the default settings that correspond to
2
3
4
7
4
24
5
2