'I broke my release
cord!'
'My wall screws have
snapped!'
'My cover is stuck!'
You don't know how strong
you are... sometimes when
the cord is pulled too hard, it
can snap.
You might not be drilling deep
enough... or your drill could
be too blunt, so that the hole is
too narrow and the screw
gets stuck.
If the space between your
wall and your wall mount is a
little too tight, things can get
tricky to reach.
TVM 3200/3400/3600 Series - English
Don't panic. Just Push the
ClickLoc™ Safety System
downwards in both strips, using a
long screwdriver or allen key.
For new release cords, please click
here to contact Vogel's Consumer
Care.
Use another hole in the wall plate
to fix the wall mount to the wall.
Make sure you use a sharp drill of
the correct size. Use the size of the
screw as indication of the depth to
be drilled.
Push a small screwdriver between
wall and wall mount to push the
snap hooks down to release.
18