Sony HANDYCAM DCR-TRV380 Operation Manual page 84

OFF Select this setting in the following rec(mling situatiom,. The camera
recording lamp will not light up during recording.
• When you do not want the subject to be nervous about being
recorded.
• When you are recording close to the subject.
• When the subject reflects Ihe recording lamp.
t>MELODY Select to sound a melody when you st irt/stop recording, operate the
touch pane], or _hen an unusual condition occurs on
your
camcorder.
NORMAL Select to sound a beep instead of the melody.
OFF Select to cancel the melody, the beep sound, the shutter sound or touch
panel operation confirmation beep.
t>LCD PANEL Select to show the displays such as Ihe time code on the LCD screen
and in the vie_finder.
V-OUT/PANEL Select to show the displays such as Ihe time code on the TV screen,
LCD screen, and in the viewfinder.
0 Note
•
YOLI c {innot input a signal to your camcorder if you press DISPLAY/BATT INFO while
[V-OUT/PANEL] is selected.
You can select the scrolling direction (up or down) of the melm items on the LCD
screen when you touch [Z] or [Z].
t>NORMAL Select to scroll the menu items dox_nwards by touching [_.
OPPOSITE Select to scroll the menu items uD_ ards by touching [_.
t>5 mill
Select to activate the Auto shut off. When approximately 5 minutes
have elapsed while you (1(7 not operate your camcorder, the camcorder
is automatically turned off to prevent the battel3' from becoming
consumed.
NEVER Select to deactivate the Auto shut off.
0 Note
• When you connect your camcordcr to the x_all outlet, [A.SHUT OFF] is automatically set
to [NEVER].
84
Using the Menu